SmartBoard Grease & Oil Stain Remover
Treats grease and stubborn oily stains on composite and timber decking.
Just spray on and brush off!
INSTRUCTIONS: Shake well before use. Holding can upright, spray directly onto the product at a distance of about 10 – 25 cm so that stain is completely covered. Apply liberally. Allow to work for at least 10 minutes until the product is completely dry then brush or wash off with luke warm soapy water. If necessary repeat the operation on tougher stains. Store only in the original container in a dry, cool and well ventilated place away from direct sunlight.
IMPORTANT: Always test on hidden or inconspicuous area of deck first to ensure colour is not adversely effected. Over exposure may result in a slight discolouration or lightening of timber. Complete stain removal cannot be guaranteed. The sooner stain remover is used on fat stained decking the greater the chance of removal. Fat stains may become more difficult to remove the Longer they are left untreated and deeper they penetrate any absorbent material.
DANGER: Repeated exposure may cause skin dryness or cracking. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear protective gloves/protective clothing/eye protection/face protection. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
CONTAINS: Acetone; Propan-2-ol; Cyclohexane.